Uwell Caliburn X Pod Kit
Product Information
| 1 x Caliburn X Device |
| 1 x Caliburn X Empty Pod |
| 1 x 0.8ohm Caliburn G Coil |
| 1 x 1.2ohm Caliburn G Coil |
| 1 x USB-C Charging Cable |
| 1 x User Manual |
To download the user manual for the Caliburn X, please click the button below.
Download User Manual
Device Instructions
- Insert the coil into the base of the empty pod to install it.
- Insert the pod into the device.
- Remove the drip tip to reveal the filling port.
- Fill the e-liquid through the filling port, secure the cap on the pod, and allow it to sit for 10 minutes.
- Press the fire button 5 times within 2 seconds to turn on, draw or press the button to vape.
To turn the device on or off, quickly press the fire button five times within 2 seconds. The display will show "UWELL" when turning on and "Goodbye" when turning off.
Adjust the airflow by sliding the airflow control valve up or down on the side of the device.
Press the fire button three times to enter power adjustment mode, causing the power display to flicker. You can then press or hold the fire button to adjust the output power between 5W and 20W. Once you are happy with your selected setting, wait three seconds, and the chosen power setting is saved automatically
The recommended wattage ranges are:
0.8Ω coil: 13-18W
1.0Ω coil: 10-15W
1.2Ω coil: 9-13W